Food processing equipment, vacuum packaging, shrink wrap, impulse sealers, vacuum tumblers, saws, meat grinders, tenderizers, vacuum pouches, shrink film, shrink bags, labels and lots more!


Our java script navigation menu is not appearing in your browser. You can turn on java script in your browser (recommended!) or click here to go to our site map. If you are using Windows XP with the service pack 2 upgrade and the Information Bar is blocking the java script, you can click on the bar and then on "Allow Blocked Content" to see the menu.

Oxygen and CO2 Shipping Container Analyzer

Analyzer Prices   Parts for gas analyzers    Purchase Gas Analyzers

                     Bridge model 900151 shipping container gas analyzer

                    Bridge Analyzers for measuring gas levels in food packaging

 

   
O2 (Oxygen) and CO2 (Carbon Dioxide) Model 900151 container headspace gas analyzer.

The Model 900151 gas analyzer is used to measure the Oxygen and Carbon Dioxide level in a Controlled Atmosphere Transport (CAT) shipping container. The analyzer is fully wash-down protected and is housed in a very compact NEMA-4 case, measuring only 6-1/4"L x 3"W x 3-1/2"H and weighing 2.5 lbs. The analyzer is fully sealed against the environment and protects the internal electronics from water and dirt intrusion, allowing the analyzer to be washed down with water after use. It also contains an internal NiMH battery pack that will operate the unit on a standalone basis for up to 8 hours.

The analyzer is controlled by an internal microprocessor, and uses time-proven NDIR technology for CO2 measurement and a rugged chemical sensor for O2 analysis. All operating controls are by means of a sealed membrane switch - and the analyzer consumes a mere 2-1/2 Watts during operation. (A detailed specification is included at the end of this description.)

The Unit is also protected by a 11"L x5"W x 5"H inches foam-filled soft case, and may be operated alone or in the soft case - the complete package weighs only 3.5 lbs.

Gas is sampled from the container by means of the gas port - an industry standard BH3-60 quick disconnect male fitting on the container and the included 6' sample line. By disconnecting the input gas line and connecting the analyzer to the container, the container ambient gas is drawn into the analyzer by means of the built-in analyzer sample pump, analyzed, and the gas data presented on the bright 1/2 inch LED displays. The analyzer contains an internal water trap and protective filter to prevent any contamination or moisture in the sample gas from reaching the analyzer optics.

Product Features

Rugged and Durable: The analyzer is enclosed in a small NEMA-4 housing inserted in a soft-filled carrying/storage case. It is designed to provide years of trouble-free service in end-of-line use.
Cordless and Mobile: The products have a large battery pack that provides 6-8 hours of cordless operation for exceptional mobility and flexibility on the process line. They also may be configured with an optional extended battery pack for 2-shift (16 hours) cordless operation.
Simple and Intuitive: The analyzer is easy to operate with a minimum of training. All analyzer controls are by means of push buttons on the front panel, and gas readings are shown on bright LED readouts as they are taken.
Low Cost of Ownership: The analyzer uses intrinsically stable gas measurement technology and does not need to be returned to the factory for periodic service or calibration.

Container Headspace Analyzer Specifications
Model 900151 (CO2 and O2)
Gas Measured: Oxygen (O2)
Carbon Dioxide (CO2)
Measurement Method: Oxygen: Electro Chemical Sensor
Carbon Dioxide: NDIR - Non-Dispersive InfraRed
Measuring Ranges: Oxygen: 0.000% to 100.0%
Carbon Dioxide: 0.000% to 100.0%
Resolution: Oxygen: 0.01% above 2.00$#37; O2, 0.001%#37; below 2.000%
Carbon Dioxide: 0.01% below 10.0%, 0.1% above 10.0%
Accuracy: 4% relative to gas reading
Repeatability: 1% relative to gas reading
Response time: 15 seconds to 95% final reading
20 Seconds to 99.5% final reading.
Sampling Rate: 5 ml/sec.
Sample Time: Adjustable in 1 second intervals. Factory default 20 seconds.
External Gas Contaminate Protection: External water blocking and particle filter (customer accessible) protects analyzer from test gas-borne contamination.
Internal Gas Contaminate Protection: Internal water blocking and particle filter (customer inaccessible) protects analyzer from test gas-borne contamination.
Start-up accuracy: 10% relative gas data 30 seconds from power up, full accuracy in 5 minutes.
Operating Temperature: +0 to +40 degrees C.
Power: Line power
Internal battery
110V/220 VAC Universal Wall Supply
NiMH battery pack, 6-8 hours per charge.
Optional extended battery: Optional extended battery pack provides 16 hours continuous operation on an overnight charge.
Weight: Unit alone:
In soft case:
2.5 Lbs.
3.5 Lbs.
Size: Unit alone:
In soft case:
6-1/4"L x 3"W x 3-1/2"H
8-1/2"L x 5"W x 5"H
PC Interface: Fully sealed serial port, 9600 baud.


Back to Home Page   Ordering/Shipping Information   Site Map   Search
Copyright © 1999-2017 Doug Care Equipment, Inc.

 MasterCard: The Future of Money(TM) VISA American Express