Food processing equipment, vacuum packaging, shrink wrap, impulse sealers, vacuum tumblers, saws, meat grinders, tenderizers, vacuum pouches, shrink film, shrink bags, labels and lots more!


If our java script navigation menu is not appearing in your browser. You can turn on java script in your browser (recommended!) or click here to go to our site map. If you are using Windows XP with the service pack 2 upgrade and the Information Bar is blocking the java script, you can click on the bar and then on "Allow Blocked Content" to see the menu.

Hot Stamp Imprinters
Seal & Stamp in One Operation

Free Standing Table Top Imprinters
Ribbons for AIE Imprinters      Ribbons for Other Brand Imprinters

Type Sets/Print Holders for Imprinters

Hot stamp or direct heat imprinters are available attached to a variety of sealers or as free standing table top units. They are quick and easy use and will print on poly bags, aluminum foil, paper and all varieties of plastic film. They clearly print manufacturing or expiration dates, SKU numbers, lot numbers, company name, weight, price, product name, country of origin, etc. Be sure to order a AIE imprinter with AIE sealers. Order the TEW imprinter for use on TEW (TISF) foot sealers.
AIE Hot Stamp Imprinters
   
AIE-662HS Mounted on an AIE Foot Sealer

Close up of Imprinter on Foot Sealer
AIE imprinter mounted on AIE auto sealer
Close up of Imprinter on Auto Sealer
   
    The AIE-662HS is for mounting on AIE Foot Sealers ONLY. The AIE-661HS is for mounting on AIE Constant Heat Sealers ONLY. Imprint up to two lines automatically at the same time your bag is sealed. The AIE-662HS will print one or two lines of up to 14 numbers/letters and come with 3 each of numbers 0-9 and 2 each "Exp", "Lot" & "Date". Type sets for AIE-662HS and AIE-662HS. We strongly recommend you add the AIE-INSIMP mounting option to have the imprinter factory installed on the sealer. Works great for a one-step seal and mark operation for all types of products that need to have code, date or number to identity the product with a permanent mark. Printing tape and type is included. Uses the 30mm ribbons. Be sure to order INKTAPE3 ribbons for these two imprinters.      
AIE HOT STAMP IMPRINTERS
MODEL APPLICATION LINES OF
PRINT
SHIPPING
WEIGHT
PRICE ORDER
ONLINE
AIE-661HS Mountable to AIE Constant Heat Sealers
(Sealer not included)
2 Lines, 14 Letters 3.5 Lbs. $520.00
AIE-662HS Mountable to AIE Foot Sealers
(Sealer not included)
2 Lines, 14 Letters 3.5 Lbs. $520.00
The two imprinters above are made to install on AIE sealers. Each have an option to have them installed to the sealer.
(The sealers are imprinter ready but do require wiring and possibly a hole or two drilled. This is a really wise option!)
NOTE: SEALERS THAT HAVE BEEN DRILLED TO ACCEPT AN IMPRINTER ARE NOT RETURNALBLE.
$75.00 Order with imprinters above
AIE-INKTAPE3-1 Replacement ribbon, Black, 30mm x 110 yards
Qty: 1 Ribbon (Minimum order 2 ribbons). Use with the 661HS, 662HS & DH3 Imprinters.
$26.00 ea 2-11
$21.00 ea 12+
AIE-INKTAPE-1 Replacement ribbon, Black, 25mm x 110 yards
Qty: 1 Ribbon (Minimum order 2 ribbons) Use with the DHH & DH2 Imprinters.
$21.00 ea 2-11
$16.00 ea 12+

        AIE imprinter die holder. This picture will give you an idea of the size. Three line holder shown.
Imprinter Die Holder
This picture will give you an idea of the size. Three line holder shown.
       

HOT STAMP IMPRINTERS FOR TEW (TISF) FOOT SEALERS

A hot stamp or direct heat imprinter is used to print date, code or other information on any poly bag, poly case, paper bag, aluminum or other material. It is easy to use and provides a distinct, clear print. They are equipped with an adjustable thermostat to control the imprinting temperature. Easy to dry and non-sticking. Convenient to change type set. Several colors of ribbon or ink-roller are available: red, yellow, blue, white, black and green. The 25mm wide ribbon is used for the mountable IT-863 imprinters. The characters are 3-4 mm x 1.5-2 mm in sizes. Usually 8-11 characters can be printed per line using a 25 mm size ribbon. An A-Z letter set and a 0-9 number set is available or individual letters and numbers are available.

    IT-863 Dry Ink Imprinter mounted on Floor Model Impulse Sealer
TEW Floor Sealer Model with Printing Sample

(Sealer not included)
   
    The RS-8/DH-8 (formerly IT-863) can be mounted on any foot-operated sealer. Imprinting coincides with the lowering of the upper jaw. Sealing and printing is done in one single operation. Capable of 3 lines imprinting; each line can hold 9 characters. Comes with number set 0-9 (3 each number) and 2 pieces of MFG, EXP and LOT. Type sets for IT-86A3, RS8 & RS20 imprinters. Uses 25mm ribbon. Order IT-RB25 ribbons. Working temperature is 250-300°C or 480-570°F.
NOTE: SEALERS THAT HAVE BEEN DRILLED TO ACCEPT AN IMPRINTER ARE NOT RETURNALBLE.
 
TEW HOT STAMP IMPRINTERS
MODEL APPLICATION LINES OF
PRINT
SHIPPING
WEIGHT
PRICE ORDER
ONLINE
RS-8/DH-8
1, 2 or 3 line
Mountable to Floor Sealer
(Sealer not included)
Up To 3 Lines 4 Lbs. $380.00


Back to Home Page   Ordering/Shipping Information   Site Map   Search
Copyright © 1999-2017 Doug Care Equipment, Inc.

 MasterCard: The Future of Money(TM) VISA American Express