Food processing equipment, vacuum packaging, shrink wrap, impulse sealers, vacuum tumblers, saws, meat grinders, tenderizers, vacuum pouches, shrink film, shrink bags, labels and lots more!


If our java script navigation menu is not appearing in your browser. You can turn on java script in your browser (recommended!) or click here to go to our site map. If you are using Windows XP with the service pack 2 upgrade and the Information Bar is blocking the java script, you can click on the bar and then on "Allow Blocked Content" to see the menu.

Direct Heat & Constant Heat Sealers

Foot Direct Heat Sealers   Automatic Direct Heat Sealers    Hand Direct Heat Sealers
Portable Direct Heat Sealers   Vertical Automatic Direct Sealers   Pneumatic Automatic Direct Sealers
Choosing a bag sealer

Auto and foot-operated constant heat or direct heat sealers will seal all types of thermoplastic packaging material. Depending on the model of the sealer, material up to 16" wide and 20 mil thick can be sealed. The meshed seal width is usually 15mm. Ideal for coated aluminum foil, Kraft paper, cellophane, gusseted bags and other thick materials. Equipped with a thermostat or an electronic thermo-controller that accurately controls the temperature from 30-550 degrees F (0-300 degrees C). Both jaws are heated simultaneously for better heat penetration to seal thicker materials. You can also seal poly bags such as polyethylene and polypropylene by covering the jaws with PTFE Non Stick tape. Sealers with a horizontal or serrated line seal will produce a seal with straight lines running across the seal, commonly used on bags of candy. Foot sealers come complete with a pedestal, base, adjustable worktable and adjustable foot control.
Easy to operate. Once the machine has reached the desired temperature (warmed up), insert the material between the two sealing bars. Press down the foot pedal or foot switch and release. The Automatic sealers can be used in auto mode by setting a recycle time or in manual mode by stepping on the included foot switch.
Direct heat or constant heat sealers are also available in Portable Sealers.
   AIE foot operated constant heat sealer    THS Series Direct Heat Foot Sealers W-300DT(S) Direct Heat Foot Sealers
AIE Foot Sealer Models
8", 12", & 16" Lengths

These foot sealers have a 15mm wide mesh seal (horizontal line seal available in the 12" model). Each unit is equipped with a temperature controller, a beeper to notify operator to release pedal and PTFE Non Stick coated sealing bars. Options that are available include hot stamp printer for printing date, time, codes, etc., heavy duty work tables, height extender, adjustable angle and extended foot pedal. Also available in upper jaw only with a 3mm sealing bar on the upper jaw only. The heat this sealer produces is very concentrated and is recommended for difficult applications that are not suited for standard style sealers. See picture below.
THS Foot Sealer Models
8", 12" & 16" Lengths

The THS series have a 15mm wide mesh seal standard and will seal all types of thermoplastic packaging material. Depending on the model of the sealer, material up to 16" wide and 20 mil thick can be sealed. Ideal for coated aluminum foil, Kraft paper, cellophane and other thick materials. Both jaws are heated simultaneously so there is a better heat penetration to seal thicker material. Comes with adjustable work table. The 12" model is available with a serrated line seal for sealing items such as candy bags. All three sizes are available with a PTFE Non Stick coated mesh seal for sealing thick plastic material that would stick to the standard jaws. A height extender is an available option that that is available for these models.

If video not showing on mobile device, search for pcW3EePmOY8 in YouTube app.

W-Series Foot Sealers Models
8", 12" & 18" Lengths

The W-SERIES have a 15mm wide mesh seal standard and will seal all types of thermoplastic packaging material including coated aluminum foil, Kraft paper, cellophane, polypropylene, poly-nylon and other thicker materials. Please note: direct heat sealers cannot seal just polyethylene. Depending on the model of the sealer, material up to 18" wide and 20 mil thick can be sealed. Both jaws are heated simultaneously so there is a better heat penetration to seal thicker material. Comes with adjustable work table. A optional serrated line seal is available on all models for sealing items such as candy bags. All three sizes are available with a PTFE Non Stick coated mesh seal for sealing thick plastic material that would stick to the standard jaws. A height extender is an available option that that is available for these models. The 8" and 18" models are special order. Spec sheet for W-Series.

If video not showing on mobile device, search for bJcsNhYD_hg in YouTube app.

AIE-202CS Direct heat sealer with one side heat only WNS-200D Direct Heat Sealer AIE automatic constant heat sealer W-300DA Direct Heat Sealer
AIE Upper Jaw Foot Sealer Models
8", 12", 16" & 24" Lengths

The upper jaw constant foot sealers have a 3mm wide mesh seal on the upper jaw only. The heat this sealer produces is very concentrated. They are recommended for difficult applications that are not suited for standard style sealers. Each unit is equipped with a temperature controller, a beeper to notify operator to release pedal and PTFE Non Stick coated sealing bars. Options that are available include hot stamp printer for printing date, time, codes, etc., heavy duty work tables, height extender, adjustable angle and extended foot pedal.
WNS-200D Direct Heat Sealer
8" x 10mm Seal length and width

Ideal for coffee gusseted bags! To operate, set the temperature, seal time and congeal time. Always start with the minimal setting and slowly increase temperature as needed. Insert material in between the seal bars and lightly bring the seal bars together using the knob. The sleek and compact design makes it suitable for small work spaces. Size is 8" x 10" x 9". Weight 18 Lbs.
AIE Auto Sealer Models
8", 12", 16" & 24" Lengths

These automatic/manual constant heat sealers have a mesh seal that is about 5/8" wide and heats from both top and bottom. Excellent for sealing poly-cello films, humidity proof cellophane films, polyethylene films, aluminum foil coated bags and gusseted bags. Separate programmable timers for material thickness, congealing and recycle time. Auto mode allows for continuous automatic operation by setting the recycle time. Foot switch is included for manual operation. Serrated (horizontal lines) jaws are available.
W Auto Sealer Model
12" Length

W-300DAT(S) is a table-top, auto, and direct heat sealer. It is equipped with an electronic timer to control the sealing time. Once the correct setting has been established, consistent seals will be maintained automatically. This 12" sealer comes in ivory with a 15mm wide PTFE Non Stick coated meshed jaws and a foot switch. The hot sealing bars are enclosed with heat resistant plastic bar for safer operation. Once the settings of the thermostat and the timer is set, consistent seals can be maintained automatically. Also available with a PTFE Non Stick coated serrated line seal. Spec sheet for W-300DAT models.

If video not showing on mobile device, search for HAT8DMCTkw0 in YouTube app.

FOOT OPERATED DIRECT HEAT SEALERS
MODEL SEAL
LENGTH
SEAL
WIDTH/TYPE
POWER
WATTS
SHIPPING
WEIGHT
PRICE ORDER
PARTS
ADD TO CART
THS-200 8" 15mm Mesh 250 38/9 Lbs. $355.00 THS-200 Parts
AIE-202CH 8" 15mm Mesh 250 46 Lbs. $378.00  
AIE-202CS
Upper Jaw Only
8" 3mm Mesh 125 46 Lbs. $440.00  
W-300DT 12" 15mm Mesh 350 41 Lbs. $389.00  
THS-300 12" 15mm Mesh 350 43/9 Lbs. $399.00 THS-300 Parts
THS-300S 12" 15mm Serrated Line Seal 350 43/9 Lbs. $399.00 THS-300S Parts
AIE-302CH 12" 15mm Mesh 350 48 Lbs. $432.00  
AIE-310CH 12" 15mm Horizontal Line 350 49 Lbs. $450.00  
AIE-302CS
Upper Jaw Only
12" 3mm Mesh 175 48 Lbs. $490.00  
THS-400 16" 15mm Mesh 420 60 Lbs. $426.00 THS-400 Parts
AIE-402CH 16" 15mm Mesh 420 53 Lbs. $485.00  
AIE-402CS
Upper Jaw Only
16" 3mm Mesh 210 53 Lbs. $529.00  
AIE-602CH 24" 15mm Mesh 420 57 Lbs. $760.00  
AIE-602CS
Upper Jaw Only
24" 3mm Mesh 420 60 Lbs. $629.00  


AUTOMATIC DIRECT HEAT SEALERS
MODEL SEAL
LENGTH/TYPE
SEAL
WIDTH
POWER
WATTS
SHIPPING
WEIGHT
PRICE ORDER
PARTS
ADD TO CART
AIE-200CA 8" 5/8" Mesh 350 40 Lbs. $670.00  
WNS-200D 8" 10mm Mesh 250 Lbs. $595.00  
W-300DAT
Table-Top
12" 15mm Mesh PTFE Non Stick Coated 350 38 Lbs. $475.00  
W-300DATS
Table-Top
12" 15mm serrated line seal 350 38 Lbs. $475.00  
AIE-300CA 12" 5/8" Mesh 450 42 Lbs. $750.00  
AIE-400CA 16" 5/8" Mesh 520 46 Lbs. $800.00  
AIE-600CA 24" 15mm Horizontal Line 600 55 Lbs. $850.00  

VERTICAL AUTOMATIC DIRECT HEAT SEALERS
AIE-300CFV vertical automatic constant heat sealer AIE Vertical Automatic Constant Heat Sealers
8", 12", 16" & 24" Lengths

Designed for applications that require vertical sealing such as the packaging of powders and liquids as well as very heavy bags that are difficult to lift. It can be combined with a conveyor for filling. Comes with an extra long stand for added flexibility. Seal material up to 20 mil thick (combined thickness up to 40 mil). Height from floor to sealing jaws is 42". They are electric foot pedal controlled and can also operate automatically. May be combined with a conveyor for ease of sealing. Also available with a double impulse seal.
MODEL SEAL
LENGTH/TYPE
SEAL
WIDTH
POWER
WATTS
SHIPPING
WEIGHT
PRICE ORDER
PARTS
ADD TO CART
AIE-200CFV 8" 15mm Mesh 350 60 Lbs. $735.00  
AIE-300CFV 12" 15mm Mesh 450 64 Lbs. $786.00  
AIE-400CFV 16" 15mm Mesh 520 69 Lbs. $799.00  
AIE-600CFV 24" 15mm Mesh 600 80 Lbs. $1,020.00  

PNEUMATIC AUTOMATIC DIRECT HEAT SEALERS
AIE Pneumatic actuated automatic constant heat sealers AIE Pneumatic Automatic Constant Heat Sealers
12", 16" & 24" Lengths

The new pneumatic constant auto sealer is unique, because the pneumatic actuated sealing pressure provides strong, consistent and controllable seals. The automatic/manual constant sealer is excellent for sealing polycello films, humidity proof cellophane films, polyethylene films, aluminum foil coated bags and guesseted bags. A distinctive 5/8 inch mesh seal makes this sealer ideal for producing wide seals on thick bags. Pneumatic activated sealers are also available in a foot impulse sealer.
Air usage is 4.0 CFM@80 PSI.
MODEL SEAL
LENGTH/TYPE
SEAL
WIDTH
POWER
WATTS
SHIPPING
WEIGHT
PRICE ORDER
PARTS
ADD TO CART
AIE-300AC 12" 15mm Mesh 450 53 Lbs. $960.00  
AIE-400AC 16" 15mm Mesh 520 59 Lbs. $1,040.00  
AIE-600AC 24" 15mm Mesh 600 66 Lbs. $1,280.00  

Back to Home Page   Ordering/Shipping Information   Site Map   Search
Copyright © 1999-2017 Doug Care Equipment, Inc.

 MasterCard: The Future of Money(TM) VISA American Express